Home / Blog / Anker SOLIX E10 Review

Anker SOLIX E10 Review, From One of Cincinnati’s First Installers

Battery Backup · 7 min read · August 24, 2026

Battery backup reviews are usually written by people who watched a launch video. This one is written by an electrician who has put the Anker SOLIX E10 on the wall, wired it into real Cincinnati homes, and handed the app to real customers. Ground Zero Electric is an Anker SOLIX authorized installer, and the E10 has become our go-to whole-home battery recommendation. Here’s the honest version of why.

What the E10 actually is

It’s a whole-home battery backup system. When the grid drops, your house switches to battery power. Not just a few outlets, the house: fridge, furnace, internet, lights, sized to your actual loads. Unlike a generator, there’s no starting it, no fueling it, no noise. It just takes over.

Why our customers actually bought it

Two recent installs, two versions of the same reason. A Montgomery homeowner had equipment he couldn’t afford to lose in an outage, and more broadly, he didn’t want to be 100% dependent on the power company. His E10 rides through outages without him touching anything. A Florence homeowner had already lived through an outage and wanted real independence. His favorite feature is one most people don’t know exists: you can choose when to run on grid power and when to run off-grid entirely. On-grid, off-grid, on demand. For someone who wants genuine energy independence, that’s the whole point.

What installation involves (the part reviews skip)

A battery system ties directly into your electrical service, which means your service has to be able to support it. On the Montgomery install, we updated the home’s dual 150-amp service to current code as part of the project. Sometimes the panel is ready as-is; sometimes it needs work first. We tell you which before anything is ordered, because finding out mid-project is how battery installs go bad.

What it costs, real numbers

Equipment: the base E10 kit starts at $5,799 and scales up with capacity. Installation: our labor starts at $2,000 for partial-home backup (your critical circuits) and $3,500 for whole-home. If service work is needed, that’s quoted up front, not discovered later.

Want to price the equipment yourself? Browse Anker’s systems through our installer link and use code GROUND5 for a discount, then send us what you’re looking at and we’ll tell you exactly what installation runs for your house.

Who it’s not for

If all you want is “the sump pump and fridge survive a 2-hour outage,” a smaller setup may serve you fine, and we’ll tell you that too. The E10 shines when you want the house to stay on and you’re done thinking about the grid every time the wind picks up.

Call or text (513) 866-8685. We’ll look at your panel, your loads, and give you a straight answer on what your house needs.